B-Type Baffle Ceiling

Product Features

Open baffle runs leave ventilation paths while screening pipework above the ceiling.
Individual strips clip onto the carrier and can be removed for maintenance.
Nominal profiles are 100, 125, 150 and 200 mm, with lengths up to 6,000 mm.

Material: Aluminum
Length: Up to 6,000 mm
Suspension system: Matching carrier or hanging system
Configuration: B-style hanging baffle

Request This Product View Specifications

Moisture resistance
Recyclable aluminum
Color retention*
Acoustic options*
Heat dissipation*
Lightweight & workable

*Color retention depends on the finish. Sound absorption requires a specified acoustic assembly; heat dissipation depends on the open or perforated layout.

Product Data

Specifications & Size Options

Technical overview
Item	Specification
Material	Aluminum
Length	Up to 6,000 mm
Suspension system	Matching carrier or hanging system
Configuration	B-style hanging baffle
Thickness increment	0.1 mm within the thickness range

Size and configuration options
Nominal profile size (mm)	Thickness (mm)	Spacing (mm)
100	0.40–0.80	100
125	0.40–0.80	100
150	0.40–0.80	100
200	0.50–0.80	100

Dimensions are in millimeters unless another unit is shown. Final sizes, finish and matching components are confirmed on the approved product schedule.

System Detail

Construction & Installation

B-style baffles with B-style carriers

B-style baffle assembly — numbered English component reference — Enlarge drawing & English key

Reading the Drawing

The B-style carriers run across the main carriers. Hanging strips clip into the repeated carrier teeth; the section shows the suspended connection.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

M8 galvanized hanger rod
38/50 main-carrier hanger
B-style carrier
38/50 main carrier
Strip-carrier hanger
B-style baffle
Galvanized hanger rod
Height: 100 / 125 / 150 / 200 mm
Profile height

Installation Steps

Measure and mark the finished ceiling elevation.
Establish the installation direction. Drill suspension points in the structural ceiling at no more than 1,200 mm spacing and secure the galvanized hanger rods with expansion anchors.
Fit the main-carrier hangers and light-steel main carriers. Adjust their height and level, keeping the carriers parallel.
Connect the B-style baffle carriers to the main carriers using strip hangers. Keep the secondary carriers parallel to one another, perpendicular to the main carriers and no more than 1,200 mm apart.
Clip the B-style baffles into the B-style baffle carriers and make the final alignment adjustments.
Keep hands clean during installation. Avoid sweat, oil and other contamination on the finished surface.

These system details explain the illustrated assembly. Anchor selection, structural capacity and final suspension spacing must follow the approved project drawings and local requirements. Different carrier configurations are not interchangeable.