U-Shaped Baffle Ceiling

Product Features

Folded U-shaped aluminum baffles form parallel open ceiling runs.
Horizontal-tooth and vertical-tooth carrier arrangements use different connection details.
Lengths are up to 6,000 mm, with spacing of at least 25 mm.

Cross-section shape: Folded open U-profile
Length: Up to 6,000 mm
Spacing: 25 mm and above; adjustable to the layout
Carrier options: Matching horizontal-tooth or vertical-tooth carrier systems

Request This Product View Specifications

Moisture resistance
Recyclable aluminum
Color retention*
Acoustic options*
Heat dissipation*
Lightweight & workable

*Color retention depends on the finish. Sound absorption requires a specified acoustic assembly; heat dissipation depends on the open or perforated layout.

Product Data

Specifications & Size Options

Technical overview
Item	Specification
Cross-section shape	Folded open U-profile
Length	Up to 6,000 mm
Spacing	25 mm and above; adjustable to the layout
Carrier options	Matching horizontal-tooth or vertical-tooth carrier systems

Size and configuration options
Face width (mm)	Height (mm)	Thickness (mm)
25	50	0.50–0.80
25	80	0.50–1.00
25	100	0.60–1.00
30	50 / 60 / 70 / 73 / 80	0.50–1.00
30	100 / 120	0.60–1.00
30	150	0.70–1.10
40	50 / 60 / 80	0.50–1.10
40	100	0.60–1.10
40	120	0.80–1.10
40	150 / 180	0.90–1.10
50	40 / 50	0.50–1.10
50	60	0.60–1.10
50	70	0.70–1.10
50	80	0.80–1.10
50	90 / 100 / 120 / 150 / 180	0.90–1.10
100 / 120 / 150 / 160	20 / 25 / 30 / 40	0.60–1.00
180	20 / 25 / 30 / 40	0.70–1.00

Dimensions are in millimeters unless another unit is shown. Final sizes, finish and matching components are confirmed on the approved product schedule.

System Detail

Construction & Installation

U-shaped baffles with horizontal-tooth carriers

Horizontal-tooth U-baffle assembly — numbered English component reference — Enlarge drawing & English key

Reading the Drawing

The horizontal-tooth carrier locates the folded U-shaped baffles. Strip hangers connect this carrier to the main framework.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

M8 galvanized hanger rod
38/50 main-carrier hanger
Horizontal-tooth carrier
Strip-carrier hanger
38/50 main carrier
U-shaped baffle
Folded U-shaped baffle
Galvanized hanger rod
Height
Base width
Baffle height

Installation Steps

Measure the finished ceiling elevation from the design drawings. Mark the level line and fix the perimeter angle along the walls.
Establish the installation direction. Drill suspension points in the structural ceiling at no more than 1,200 mm spacing and secure the galvanized hanger rods with expansion anchors.
Fit the main-carrier hangers and light-steel main carriers. Adjust their height and level, keeping the carriers parallel.
Use strip hangers to connect the horizontal-tooth carriers to the main carriers. Level the secondary carriers; keep them parallel to one another and perpendicular to the main carriers.
Fit the U-shaped baffles into the matching secondary-carrier clips, working in one direction.
Measure perimeter panels on site, cut them to fit and support their edges on the perimeter angle.
Keep hands clean during installation. Avoid sweat, oil and other contamination on the finished surface.

Combined U-shaped baffles with vertical-tooth carriers

Vertical-tooth combined U-baffle assembly — numbered English component reference — Enlarge drawing & English key

Reading the Drawing

The vertical-tooth arrangement uses a different carrier and a separate cover profile. Fit the baffles and covers in the illustrated order.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

M8 galvanized hanger rod
Main-carrier hanger
Vertical-tooth carrier
Strip-carrier hanger
Baffle cover
U-shaped baffle
Base width
Folded U-shaped baffle
Galvanized hanger rod
38/50 main-carrier hanger
38/50 main carrier
Height
Baffle height

Installation Steps

Measure the finished ceiling elevation from the design drawings. Mark the level line and fix the perimeter angle along the walls.
Establish the installation direction. Drill suspension points in the structural ceiling at no more than 1,200 mm spacing and secure the galvanized hanger rods with expansion anchors.
Fit the main-carrier hangers and light-steel main carriers. Adjust their height and level, keeping the carriers parallel.
Use strip hangers to connect the vertical-tooth baffle carriers to the main carriers. Level the secondary carriers; keep them parallel to one another and perpendicular to the main carriers.
Clip the folded U-shaped baffles into the vertical-tooth carriers, then align and insert the cover profiles into the baffles.
Measure perimeter panels on site, cut them to fit and support their edges on the perimeter angle.
Keep hands clean during installation. Avoid sweat, oil and other contamination on the finished surface.

These system details explain the illustrated assembly. Anchor selection, structural capacity and final suspension spacing must follow the approved project drawings and local requirements. Different carrier configurations are not interchangeable.