Low-Edge Clip-In Ceiling

Product Features

The 20 mm panel returns clip into concealed triangular carriers.
The assembly comprises panels, main and secondary carriers, and their connecting fittings.
Plain and perforated faces are available in the panel modules shown in the size table.

Panel type: Clip-in aluminum tile
Edge height: 20 mm
Face: Unperforated or perforated
Thickness increments: 0.05 mm; 0.10 mm for the 600 × 2,400 mm format

Request This Product View Specifications

Moisture resistance
Recyclable aluminum
Color retention*
Acoustic options*
Heat dissipation*
Lightweight & workable

*Color retention depends on the finish. Sound absorption requires a specified acoustic assembly; heat dissipation depends on the open or perforated layout.

Product Data

Specifications & Size Options

Technical overview
Item	Specification
Panel type	Clip-in aluminum tile
Edge height	20 mm
Face	Unperforated or perforated
Thickness increments	0.05 mm; 0.10 mm for the 600 × 2,400 mm format

Size and configuration options
Module (mm)	Thickness (mm)	Edge height (mm)
300 × 300	0.35–0.70	20
300 × 600	0.45–0.70	20
300 × 1,200	0.50–0.90	20
400 × 400	0.40–0.80	20
400 × 1,200	0.70–1.20	20
500 × 500	0.40–0.80	20
600 × 600	0.40–1.00	20
600 × 1,200	0.65–1.10	20
600 × 2,400 (square edge)	1.20–1.50	20

Dimensions are in millimeters unless another unit is shown. Final sizes, finish and matching components are confirmed on the approved product schedule.

System Detail

Construction & Installation

Low-edge panels with triangular carriers

Low-edge concealed-grid assembly — numbered English component reference — Enlarge drawing & English key

Reading the Drawing

The panel returns clip into triangular carriers. The component views show the triangular carrier, splice connector and hanger.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

Triangular carrier
Carrier connector
Triangular-carrier hanger
M8 galvanized hanger rod
38/50 main carrier
Ceiling panel
Low-edge ceiling panel

Installation Steps

Components: M8 galvanized rods; 38/50 light-steel main carriers; triangular-carrier hangers and connectors; low-edge panels.

Measure the finished ceiling elevation from the design drawings. Mark the level line and fix the perimeter angle along the walls.
Establish the installation direction. Drill suspension points in the structural ceiling at no more than 1,200 mm spacing and secure the galvanized hanger rods with expansion anchors.
Fit the main-carrier hangers and light-steel main carriers. Adjust their height and level, keeping the carriers parallel.
Use triangular-carrier hangers to connect the triangular concealed carriers to the main carriers. Level the secondary carriers; keep them parallel to one another and perpendicular to the main carriers.
Align the two clip edges with the triangular-carrier slots. Gently press upward along the panel edges until the folded edges lock into the carrier.
Measure perimeter panels on site, cut them to fit and support their edges on the perimeter angle.
Keep hands clean during installation. Avoid sweat, oil and other contamination on the finished surface.

These system details explain the illustrated assembly. Anchor selection, structural capacity and final suspension spacing must follow the approved project drawings and local requirements. Different carrier configurations are not interchangeable.