Custom Aluminum Panel

Product Features

Panel outlines may be flat, folded, curved or irregular.
Service openings, edge returns and attachment points are fabricated to the individual panel drawing.
Separate panel references identify pieces with different shapes or connections.

Material: Formed aluminum sheet
Geometry: Flat, folded, curved or irregular
Size and thickness: Project-specific
Detailing: Custom edges, openings and attachment points

Request This Product View Specifications

Made to panel drawings
Formed corners and edges
Sprayed color options

Product Data

Specifications & Size Options

Technical overview
Item	Specification
Material	Formed aluminum sheet
Geometry	Flat, folded, curved or irregular
Size and thickness	Project-specific
Detailing	Custom edges, openings and attachment points

Dimensions are in millimeters unless another unit is shown. Final sizes, finish and matching components are confirmed on the approved product schedule.

System Detail

Construction & Installation

Panel Construction & Connections

The corner detail shows aluminum panels, angle-steel supports, expansion anchors and a backer-rod/sealant joint.
The internal-corner detail shows connecting plates, rear stiffeners, aluminum carriers and an isolating pad at the connection.
The panel connection detail fixes a connecting plate to studs on the panel using nuts.

Panel corners and fixing connections

Reading the Drawing

The corner, framing and rear-panel connections are separate details. The connection details identify angle supports, expansion anchors, isolation pads, rear stiffeners, studs and connecting plates.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

2.5 mm aluminum panel
M12 expansion anchor
50 × 50 × 5 angle steel
20 mm backer rod and sealant
Internal-corner connection
Connecting plate
Rear stiffener
Single-layer aluminum panel
Aluminum blind rivet
Horizontal aluminum carrier
Isolating pad
Stainless-steel bolt
Aluminum main carrier
Panel-to-panel connection
Fit studs to the panel, then attach the connecting plate with nuts
Hanging bracket
Bracket connection
No. 60 hanging bracket
6 mm nut
Aluminum stud
Carrier

These system details explain the illustrated assembly. Anchor selection, structural capacity and final suspension spacing must follow the approved project drawings and local requirements. Different carrier configurations are not interchangeable.

Typical Applications

Interior and exterior walls, entrance facades, columns, corridors, pedestrian bridges, elevator surrounds, balcony surrounds, signs and shaped ceilings.

A Closer Look