Grille Ceiling

Product Features

Main and cross strips interlock to form an open-cell grid.
Base-width options are 10, 15 and 18 mm, with different height and sheet-thickness ranges.
The open cells leave space for ventilation and coordination with ceiling services.

Material: Aluminum strip grid
Base widths: 10 / 15 / 18 mm
Thickness increments: 0.05 mm
Cell size: Set to the ceiling layout

Request This Product View Specifications

Moisture resistance
Recyclable aluminum
Color retention*
Acoustic options*
Heat dissipation*
Lightweight & workable

*Color retention depends on the finish. Sound absorption requires a specified acoustic assembly; heat dissipation depends on the open or perforated layout.

Product Data

Specifications & Size Options

Technical overview
Item	Specification
Material	Aluminum strip grid
Base widths	10 / 15 / 18 mm
Thickness increments	0.05 mm
Cell size	Set to the ceiling layout

Size and configuration options
Base width (mm)	Height options (mm)	Thickness ranges (mm)
10	30 / 36 / 40 / 45 / 50	0.30–0.50 or 0.30–0.55
15	50 / 60 / 70 / 80	0.50–0.70 or 0.50–0.80
18	60 / 70 / 80 / 90 / 100	0.50–0.70

Dimensions are in millimeters unless another unit is shown. Final sizes, finish and matching components are confirmed on the approved product schedule.

System Detail

Construction & Installation

Open-cell grille assembly

Reading the Drawing

Main and cross strips interlock to form the open-cell module. Dedicated grille hangers connect the assembled modules to the suspended main carriers.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

Main grille strip
Cross grille strip
M8 galvanized hanger rod
38/50 main-carrier hanger
38/50 main carrier
Grille hanger

Installation Steps

Assemble the main strips below the cross strips. Insert the cross strips downward into the main strips, keeping each group parallel.
Suspend and level the light-steel main carriers to the design elevation; keep them parallel.
Assemble the grille on a workbench to the required lengths. The illustrated method uses typical 2,000 × 2,000 mm modules.
Hang each module from the main carriers using the dedicated grille hangers. Connect neighboring modules by engaging the cross strips.
Make small alignment adjustments after the modules are hung.
Finish the perimeter with an edge angle.
Keep hands clean during installation. Avoid sweat, oil and other contamination on the finished surface.

These system details explain the illustrated assembly. Anchor selection, structural capacity and final suspension spacing must follow the approved project drawings and local requirements. Different carrier configurations are not interchangeable.