Exterior Aluminum Cladding Panels

Product Features

Folded perimeter returns and fixing tabs connect the panel to the facade frame.
Rear connecting plates and stiffeners are detailed separately from the visible panel face.
The connection drawings include corner supports, isolation pads and sealed joints.

Panel type: Aluminum sheet with folded returns
Dimensions and thickness: Made to the approved panel schedule
Joint arrangement: Set out to suit the facade grid
Exposure: Exterior wall and soffit applications

Request This Product View Specifications

Flat or curved panels
Defined panel joints
Specified exterior coating

Product Data

Specifications & Size Options

Technical overview
Item	Specification
Panel type	Aluminum sheet with folded returns
Dimensions and thickness	Made to the approved panel schedule
Joint arrangement	Set out to suit the facade grid
Exposure	Exterior wall and soffit applications

Dimensions are in millimeters unless another unit is shown. Final sizes, finish and matching components are confirmed on the approved product schedule.

System Detail

Construction & Installation

Panel Construction & Connections

The corner detail shows aluminum panels, angle-steel supports, expansion anchors and a backer-rod/sealant joint.
The internal-corner detail shows connecting plates, rear stiffeners, aluminum carriers and an isolating pad at the connection.
The panel connection detail fixes a connecting plate to studs on the panel using nuts.

Panel corners and fixing connections

Reading the Drawing

The corner, framing and rear-panel connections are separate details. The connection details identify angle supports, expansion anchors, isolation pads, rear stiffeners, studs and connecting plates.

Numbered Component Key

Match each number to the label below. Dimensions shown on the drawing are in millimeters unless noted.

2.5 mm aluminum panel
M12 expansion anchor
50 × 50 × 5 angle steel
20 mm backer rod and sealant
Internal-corner connection
Connecting plate
Rear stiffener
Single-layer aluminum panel
Aluminum blind rivet
Horizontal aluminum carrier
Isolating pad
Stainless-steel bolt
Aluminum main carrier
Panel-to-panel connection
Fit studs to the panel, then attach the connecting plate with nuts
Hanging bracket
Bracket connection
No. 60 hanging bracket
6 mm nut
Aluminum stud
Carrier

These system details explain the illustrated assembly. Anchor selection, structural capacity and final suspension spacing must follow the approved project drawings and local requirements. Different carrier configurations are not interchangeable.